• Software for: i70 & i70s Multifunction Instrument Displays
  • Version: v3.11
  • Date Released: Nov 2017
i70s Software | Raymarine by FLIR  

Downloading the Software

Select the software update below depending on which Multifunction Display (MFD) you will be using to perform the Remote Update.

Warning a/c/e/eS/gS Series - Updating via a/c/e/eS/gS Series display. MFD software must be at level v13.37 and above - Click here to update your MFD  
Warning G Series - Updating via G Series system. System software must be at level v4.49 and above - Click here to update your MFD  

Info AXIOM and a/c/e/eS/gS Download - This download now contains the following additional product updates:

  • Instruments – i60, i70, iTC-5, p70/p70R

Info AXIOM and a/c/e/eS/gS Download - Do not copy the Bootcode and Application ".ISO" files onto the same software card. The MFD cannot install Bootcode and Application .ISO files at the same time.


Current MFDs



AXIOM 7 184x169DownloadBootcode   

eS Series

eS SeriesDownloadBootcode   

a/c/e/gS Series

a/c/e/gS Series Software | Raymarine by FLIRDownloadBootcode   

Retired / Legacy MFDs


G Series

G SeriesDownload  

E Wide

E WideDownload  

C Wide

C WideDownload  

E Classic

E ClassicDownload  

C Classic

C ClassicUnavailable  

A Classic

A ClassicDownload  

Open Source GPL/LGPL

Some Raymarine products contain software code developed by third parties that are covered by open source GPL and LGPL software license agreements. You can view the third party license agreements by visiting the Manuals and Documents section of our website.

To access the open source GPL and LGPL licensed executables click here

Software History

Version Release Date Features
v3.11 Nov 2017
  • Fixed an intermittent detection of the DST800 Smart Transducer, when performing the Calibration process.
v3.08 Feb 2017
  • Added the ability to select Engine Trim in the bespoke engine pages
  • Bug fix for Translations - Italian word for "Alarm" corrected
v3.07 Aug 2016
  • Honda ECO mode has now been implemented in the Engine Data pages. The ECO mode is only supported if a compatible Honda engine is directly interfaced via NMEA2000 (it is not supported via an ECI-100 v1.20)
v3.06 June 2016
  • Bug Fix for Translations, where some pages were not accessible in certain Languages
v3.05 May 2016
  • Supports the calibration of the P79s (NMEA2000) In-Hull Depth Smart Transducer
  • Now fully compliant with the NMEA2000 standard
v2.22 May 2016
  • The choice of STW or SOG can now be selected in the Engine Overview Data Pages
  • General other software enhancements
v2.18 Oct 2014
  • Various improvements and fixes
v2.17 Aug 2014
  • Speed Calibration process now improved to include three levels. (Single point, Add Points & Advanced)
  • Analogue Rudder Angle dial can now be displayed as a full page
  • Added Translation changes to reflect new features and Language corrections
  • MOB pop up Page added & Alarm can be silenced
  • AIS SART targets now displayed correctly
  • Gear Transmission Oil Temperature & Pressure now displayed correctly
  • Corrections & Enhancements to the MDS (Multiple data Selection) functionality
  • General corrections to calculated navigation data such as CMG & CTS
  • Depth Alarms now cancelled on any display globally
  • Graphic History Pages now show vertical scale
  • Fuel Flow Rate Bar can now be selected
  • About System added to Diagnostic Menu. Will search & display devices found on STNG
v1.25 May 2012
  • Full compatibility with the new Instrument Transducer Converter (ITC-5)
    • This will allow full Calibration and set-up of all Transducer variants supported by the ITC-5
v1.15 Jan 2012
  • Corrects a fault when Turkish Language is selected, where the i70 could lock up or reset
  • Modification to Temperature calibration
  • The TRIP value can now be reset. The Trip value has the following functions:
    • i70 & Speed Pod – Trip stored in i70 and is individual to each display.
    • i70 & DST800 – Trip stored in DST and is a single global Trip.
    • i70 & ITC-5 – Trip stored in ITC-5 and is a single global Trip.
v1.01 Jan 2012
  • Bootcode upgrade to support v1.15 application
v1.08 ###
  • Initital Release