Raymarine iTC-5 Instrument Transducer Converter

Transducer signals are easily converted to SeaTalk^ng

iTC-5 Instrument Transducer Converter | Raymarine

iTC-5 Instrument Transducer Converter Features

The Raymarine iTC-5 converts analogue transducer signals used in i70, ST70+ and ST70 instrument systems to SeaTalk^ng.

Transducers for Speed/Temperature, Depth, Wind, Rudder Angle and ~~Fluxgate Compass~~ can be connected to the one iTC-5 unit, eliminating the need for multiple ST70 pods.

Extended ST^ng systems can support multiple iTC-5 units.

SeaTalk^ng connections at the base of the unit simply connect the iTC-5 unit into the SeaTalk^ng backbone.

Please note the ST40/i40/i50/i60 and ST60+ displays cannot calibrate the iTC-5. Only the i70 has full transducer calibration. The ST70/ST70+ can calibrate the Depth, Wind and Speed/Temp transducers (not Rudder or Compass).

If you don't have an ST70/ST70+ or i70 in your system, then the ST40/i40/i50/i60/ST60+ displays must be interfaced directly to the relevant analogue transducers

Raymarine Retired Product

The Fluxgate Compass is now a retired product and no longer supported. All instances here are for reference purposes only for existing Fluxgate Compasses in the field.


	TRANSDUCER CONNECTIONS
Item	Description
1	Red - Speed and sea temperature transducer connection
2	Orange - Wind transducer and rotavecta connection
3	Yellow - ~~Fluxgate Compass connection~~ Fluxgate Compass is now a retired product
4	Green - Rudder reference transducer connection
5	Blue - Depth transducer connection
6	SeaTalk^ng backbone connection
7	SeaTalk^ng spur connection
8	Sea Talk^ng backbone connection

Possible systems

Note: In a SPX autopilot system the fluxgate compass and rudder reference transducer must be connected directly to the course computer and not the iTC-5.


	BASIC SEATALK^NG SYSTEM WITH iTC-5
Part Number	Description
1	ST70 Instrument display
2	2 x i70 Instrument displays
3	Terminated SeaTalk^ng T-piece connector
4	Terminated iTC-5
5	Rudder reference transducer
6	Depth transducer
7	~~Fluxgate Compass~~ Now Retired
8	Raymarine wind transducer or Rotavecta
9	Speed and sea temperature transducer


	EXTENDED SEATALK^NG SYSTEM WITH iTC-5
Part Number	Description
1	ST70 Instrument display
2	p70r Pilot Controller
3	i70 Instrument display
4	AIS tranceiver
5	SPX course computer (supplying 12 V power to SeaTalkng network)
6	Man Over Board (MOB)
7	SeaTalk^ng 5-way connector
8	Rudder reference transducer (connected via SPX)
9	~~Fluxgate Compass (connected via SPX)~~ Now Retired
10	Multifunction display with built in GPS
11	SeaTalk to SeaTalk^ng converter
12	iTC-5
13	Terminated iTC-5
14	Trim tabs
15	Engine data (connected via devicenet adaptor)
16	Terminated SeaTalk^ng 5-way connector
17	Depth transducer
18	Speed and sea temperature transducer
19	Raymarine wind transducer or rotavecta

iTC-5 Specifications


	GENERAL SPECIFICATIONS
Product Number	E70010
Nominal supply voltage	12 V dc
Operating voltage range	9 - 16 V dc
Current	<150 mA peak operating current
Power consumption	Typical: 1.5 W
Environmental	Installation environment: Operating temperature = -15ºC to +55ºC Storage temperature = -25ºC to +70ºC Relative humidity: max 95% Splash proof to IPX2
Data connections	SeaTalk^ng backbone 1 x SeaTalk^ng spur 5 x transducer connections with spade terminals
Conformance	Europe: 2004/108/EC Australia and New Zealand: C-Tick Compliance Level 2

iTC-5 Unit Dimensions

iTC-5 Ordering Information


	ORDERING INFORMATION
Part No.	Description
E70010	iTC-5 Instrument Transducer Converter
A80002	iTC-5 Cover Spare

iTC-5 - What's in the box?

The iTC-5 is available with the features, options, and accessories described below.
Refer to the packing list enclosed with your iTC-5 shipment to determine the actual contents of your package.

iTC-5

Documentation Pack - Manual Number: 87138

Fixing screws x 2 - No.6 x ¾ Pan Head Pozidriv, Stainless Steel

400mm SeaTalk^ng spur cable - A06038