Raymarine S1000 Inboard Autopilot with Wireless Remote Control

Raymarine S1000 Inboard Autopilot

The Raymarine S1000 autopilot is for powerboats with a Seastar hydraulic system or other balanced hydraulic system. Complete with everything needed for easy installation*, the Raymarine S1000 Inboard Autopilot is quick to fit and simple to use. No added complications from electronic compass or rudder reference transducers – the Raymarine S1000 Inboard Autopilot doesn't need them.

Control the Raymarine S1000 autopilot with the Raymarine S100 wireless remote; simply steer on to your desired heading, press PILOT to engage the pilot into auto and off you go. To adjust your heading at any time, simply press the port/starboard arrow keys until the heading you want is displayed. To disengage the pilot, press STANDBY – that's all there is to it!

Raymarine S1000 Inboard Autopilot with Wireless Remote Connections

Raymarine S1000 Inboard Autopilot Features

A 'back to basics' point and shoot autopilot
Designed for balanced hydraulic systems
No electronic compass or rudder reference transducer needed
NMEA input from handheld or fixed GPS/Navigator/Plotter is required
Built-in fishing patterns include cloverleaf, zig-zag and circle
Troll at speeds as low as 1 knot (subject to environmental conditions) - operation below 2.5kts cannot be guaranteed, as adverse wind and tide conditions could prevail.
Can be linked to kicker motor
SeaTalk GPS/Plotter compatible

In the Box

Installation video – watch before you fit
Wireless S100 handheld controller with lanyard, belt clip and two storage cradles
Easy-install S1000 course computer
Hydraulic pump supplied pre-assembled with swaged hydraulic hoses
Bleed kit: oil, container, gloves, wrenches and connectors

*The S1000 Autopilot requires input from a GPS Antenna. If you do not have an existing GPS take a look at the Raystar125

Fishing Patterns

The Raymarine S1000 Inboard Autopilot incorporates a number of dedicated fishing patterns. Patterns include: Cloverleaf, Zig Zag and Circle.