RealVision 3D Sonar Transducers for Raymarine Axiom Multifunction Displays

Compatible with all Axiom, Axiom+, Axiom PRO and Axiom XL* MFDs with built-in 3D sonar

Sonar Transducers for Multifunction Displays with built-in realvision 3D sonar | Marine Electronics by Raymarine

RealVision 3D Transducers combine CHIRP DownVision, CHIRP SideVision, High Frequency CHIRP, and RealVision 3D into a single transducer housing.

*Axiom XL needs an RV transducer connected to a networked RVX1000, Axiom RV or Axiom Pro RVX to display RealVision.

Transom Mount Transducers compatible with Axiom™ & Axiom™Pro Multifunction Displays

RV-100 All-In-One Transom Mount Transducer | Raymarine by FLIR

RV-100 All-In-One Transom Mount Transducer

Transom Mount

Raymarine’s RV-100 All-In-One Transom Mount Transducer lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D sonar. The RV-100 is a 4-channel, Wide Spectrum CHIRP transducer with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. The transducer has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, automatically compensating for vessel motion. You’ll enjoy crystal-clear imagery in waves, swells and while maneuvering. The RV-100 also has a built-in fast response water temperature sensor for quick, accurate readings.

The RV-100 is designed for easy transom mounting on outboard-powered motor boats. It features a rugged, marine-grade stainless steel mounting bracket with integrated kick-up to prevent damage in the event of a strike with floating debris, rocks, or stumps.

The RV-100 can also be removed from the transom bracket and attached to the stainless Jack-Plate mounting bracket (sold separately) which is ideal for bass boats, flats boats and skiffs. The RV-100 can also be mounted onto stepped hull vessels using the optional stainless steel step-mounting bracket (sold separately)

What’s in the Box?

  • RV-100 All-In-One Transom Mount Transducer with 8-meter (26-foot) cable
  • Transom bracket
  • Mounting hardware
  • Installation instructions

Part Number: A80464

Through Hull Transducers compatible with Axiom™ & Axiom™Pro Multifunction Displays

RV-200 Bronze All-In-One Through Hull Transducer | Raymarine by FLIR

RV-200 Bronze All-In-One Through Hull Transducer (with 0° deadrise compensation)

Through Hull

Raymarine’s RV-200 Bronze All-In-One Through Hull Transducer is designed for inboard and outboard powerboats. The RV-200 lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar.

The RV-200 is a 4-channel, Wide Spectrum CHIRP transducer with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. The transducer has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, automatically compensating for vessel motion. You’ll enjoy crystal-clear imagery in waves, swells, and while maneuvering. The RV-200 also has a built-in fast response water temperature sensor for quick, accurate readings.

The RV-200 features a rugged cast-bronze through hull body suitable for fiberglass or wooden hulls. The RealVision 3D™ transducer elements are arranged with a 0° offset for boats with flat bottoms. The low-profile design slips effortlessly through the water without causing drag or cavitation. The near-flush RV-200 works great on trailered boats too, and with no fairing block to cut, installation is a breeze.

What’s in the Box?

  • RV-200 Bronze All-In-One Through Hull Transducer with 8-meter (26-foot cable)
  • Anti-rotation bolt kit
  • Installation instructions

Part Number: A80465

 

RV-300 Plastic All-In-One 0° Through Hull Transducer | Raymarine by FLIR  

RV-300 Plastic All-In-One 0° Through Hull Transducer (with 0° deadrise compensation)

Through Hull

Raymarine’s RV-300 Plastic All-In-One Through Hull Transducer is designed for inboard and outboard powerboats. The RV-300 lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar.

The RV-300 is a 4-channel, Wide Spectrum CHIRP transducer with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. The transducer also has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, compensating automatically for vessel motion. You’ll enjoy crystal-clear imagery even in waves, swells, and when maneuvering. The RV-300 also has a built-in fast response water temperature sensor for quick, accurate readings.

The RV-300 features a rugged plastic through hull body suitable for fiberglass, steel or aluminum hulls. The RealVision 3D™ transducer elements are arranged with a 0° offset for boats with flat bottoms. The low-profile design slips effortlessly through the water without causing drag or cavitation. The near-flush RV-300 works great on trailered boats too and with no fairing block to cut, installation is a breeze.

What’s in the Box?

  • RV-300 Plastic All-In-One Through Hull Transducer with 8-meter (26-foot cable)
  • Anti-rotation bolt kit
  • Installation instructions

Part Number: A80470

 

RV-400 Stainless Steel All-In-One 0° Through Hull Transducer | Raymarine by FLIR

- RV-400 Stainless Steel All-In-One 0° Through Hull Transducer (with 0° Tilt)

Through Hull

Raymarine’s RV-400 stainless steel all-in-one through hull transducer is designed for inboard and outboard powerboats. The RV-400 lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar. The RV-400 is a 4-channel, Wide Spectrum CHIRP transducer with DownVision™, SideVision™, conical CHIRP fish targeting and RealVision 3D™ sonar inside. The transducer also has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, compensating automatically for vessel motion. You’ll enjoy crystal-clear imagery even in waves, swells, and when maneuvering. The RV-400 also has a built-in fast response water temperature sensor for quick, accurate readings.

The RV-400 features a rugged stainless steel through hull body suitable for fiberglass, wood or metal hulls. The RealVision 3D™ transducer elements are arranged with a 0° offset for boats with flat bottoms. The low-profile design slips effortlessly through the water without causing drag or cavitation. The near-flush RV-400 works even works great on trailered boats and with no fairing block to cut, installation is a breeze.

What’s in the Box?

  • RV-400 stainless steel all-in-one through hull transducer with 8-meter (26-foot cable)
  • Anti-rotation bolt kit
  • Transducer locknut
  • Installation instructions

Part Number: A80615

 

RV-212 Bronze Through Hull Transducer Pack | Raymarine by FLIR  

RV-212 Bronze Through Hull Transducer Pack (with 12° deadrise compensation)

Through Hull

Designed for inboard or outboard boats, the RV-212 Bronze Through Hull Transducer System lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar.

The RV-212 system is a 4-channel, Wide Spectrum CHIRP transducer system with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. The transducer system has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, automatically compensating for vessel motion. You’ll enjoy crystal-clear imagery in waves, swells, and while maneuvering. The RV-212 system also has a built-in fast response water temperature sensor for quick, accurate readings.

Raymarine’s RV-212 Bronze Through Hull Transducer system pack contains a pair of RealVision 3D transducers with internal offset to accommodate hull deadrise angles from 6° to 18°. This completely eliminates the need for fairing blocks. The low-profile design slips effortlessly through the water without causing drag or cavitation. The near-flush RV-212 system works great on trailered boats too.

The RV-212 system features rugged cast-bronze through hull bodies suitable for fiberglass or wooden hulls. One transducer transmits and receives to port and downwards, the other to starboard and downwards, ensuring a full 180° of underwater coverage even on boats with deep keels or other underwater protrusions. Each transducer features a 2-meter pigtail, joining y-cable and 8-meter extension cable, resulting in an overall cable length of 10 meters (33 feet.)

What’s in the Box?

  • RV-212P Bronze Port Transducer with 2-meter cable
  • RV-212S Bronze Starboard Transducer with 2-meter cable
  • RealVision 3D Transducer Y-Cable
  • RealVision 3D 8-meter (26-feet) Transducer Extension Cable
  • Anti-rotation bolt kit
  • Installation instructions

Part Number: T70318

 

RV-220 Bronze Through Hull Transducer Pack | Raymarine by FLIR  

RV-220 Bronze Through Hull Transducer Pack (with 20° deadrise compensation)

Through Hull

Designed for inboard or outboard boats, the RV-220 Bronze Through Hull Transducer System lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar.

The RV-220 system is a 4-channel, Wide Spectrum CHIRP transducer system with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. The transducer system has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, automatically compensating for vessel motion. You’ll enjoy crystal-clear imagery in waves, swells, and while maneuvering. The RV-220 system also has a built-in fast response water temperature sensor for quick, accurate readings.

Raymarine’s RV-220 Bronze Through Hull Transducer system pack contains a pair of RealVision 3D transducers with internal offset to accommodate hull deadrise angles from 14° to 26°. This completely eliminates the need for fairing blocks. The low-profile design slips effortlessly through the water without causing drag or cavitation. The near-flush RV-220 system works great on trailered boats too.

The RV-220 system features rugged cast-bronze through hull bodies suitable for fiberglass or wooden hulls. One transducer transmits and receives to port and downwards, the other to starboard and downwards, ensuring a full 180° of underwater coverage even on boats with deep keels or other underwater protrusions. Each transducer features a 2-meter pigtail, joining y-cable and 8-meter extension cable, resulting in an overall cable length of 10 meters (33 feet.)

What’s in the Box?

  • RV-220P Bronze Port Transducer with 2-meter cable
  • RV-220S Bronze Starboard Transducer with 2-meter cable
  • RealVision 3D Transducer Y-Cable
  • RealVision 3D 8-meter (26-feet) Transducer Extension Cable
  • Anti-rotation bolt kit
  • Installation instructions

Part Number: T70319

 

RV-312 Plastic Through Hull Transducer Pack | Raymarine by FLIR  

RV-312 Plastic Through Hull Transducer Pack (with 12° deadrise compensation)

Through Hull

Designed for inboard or outboard boats, the RV-312 Plastic Through Hull Transducer System lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar.

The RV-312 system is a 4-channel, Wide Spectrum CHIRP transducer system with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. The transducer system has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, automatically compensating for vessel motion. You’ll enjoy crystal-clear imagery in waves, swells, and while maneuvering. The RV-312 system also has a built-in fast response water temperature sensor for quick, accurate readings.

Raymarine’s RV-312 Plastic Through Hull Transducer system pack contains a pair of RealVision 3D transducers with internal offset to accommodate hull deadrise angles from 6° to 18°. This completely eliminates the need for fairing blocks. The low-profile design slips effortlessly through the water without causing drag or cavitation. The near-flush RV-312 system works great on trailered boats too.

The RV-312 system features rugged plastic through hull bodies suitable for fiberglass, steel or aluminum hulls. One transducer transmits and receives to port and downwards, the other to starboard and downwards, ensuring a full 180° of underwater coverage even on boats with deep keels or other underwater protrusions. Each transducer features a 2-meter pigtail, joining y-cable and 8-meter extension cable, resulting in an overall cable length of 10 meters (33 feet.)

What’s in the Box?

  • RV-312P Plastic Port Transducer with 2-meter cable
  • RV-312S Plastic Starboard Transducer with 2-meter cable
  • RealVision 3D Transducer Y-Cable
  • RealVision 3D 8-meter (26-feet) Transducer Extension Cable
  • Anti-rotation bolt kit
  • Installation instructions

Part Number: T70320

 

RV-320 Plastic Through Hull Transducer Pack | Raymarine by FLIR  

RV-320 Plastic Through Hull Transducer Pack (with 20° deadrise compensation)

Through Hull

Designed for inboard or outboard boats, the RV-320 Plastic Through Hull Transducer System lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar.

The RV-320 system is a 4-channel, Wide Spectrum CHIRP transducer system with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. The transducer system has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, automatically compensating for vessel motion. You’ll enjoy crystal-clear imagery in waves, swells, and while maneuvering. The RV-320 system also has a built-in fast response water temperature sensor for quick, accurate readings.

Raymarine’s RV-320 Plastic Through Hull Transducer system pack contains a pair of RealVision 3D transducers with internal offset to accommodate hull deadrise angles from 14° to 26°. This completely eliminates the need for fairing blocks. The low-profile design slips effortlessly through the water without causing drag or cavitation. The near-flush RV-320 system works even works great on trailered boats.

The RV-320 system features rugged plastic through hull bodies suitable for fiberglass, steel or aluminum hulls. One transducer transmits and receives to port and downwards, the other to starboard and downwards, ensuring a full 180° of underwater coverage even on boats with deep keels or other underwater protrusions. Each transducer features a 2-meter pigtail, joining y-cable and 8-meter extension cable, resulting in an overall cable length of 10 meters (33 feet.)

  • RV-320P Plastic Port Transducer with 2-meter cable
  • RV-320S Plastic Starboard Transducer with 2-meter cable
  • RealVision 3D Transducer Y-Cable
  • RealVision 3D 8-meter (26-feet) Transducer Extension Cable
  • Anti-rotation bolt kit
  • Installation instructions

Part Number: T70321

 

RV-412 Plastic Through Hull Transducer Pack | Raymarine by FLIR

RV-412 Stainless Steel Through Hull Transducer Pack (with 12° Tilt)

Through Hull

Designed for inboard or outboard boats, the RV-412 stainless steel through hull transducer system lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar.

The RV-412 system is a 4-channel, Wide Spectrum CHIRP transducer system with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. The transducer system has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, automatically compensating for vessel motion. You’ll enjoy crystal-clear imagery in waves, swells, and while maneuvering. The RV-412 system also has a built-in fast response water temperature sensor for quick, accurate readings.

Raymarine’s RV-412 Plastic Through Hull Transducer system pack contains a pair of RealVision 3D transducers with internal tilt to accommodate hull deadrise angles from 6° to 18°. This completely eliminates the need for fairing blocks. The low-profile design slips effortlessly through the water without causing drag or cavitation. The near-flush RV-412 system works even works great on trailered boats.

The RV-412 system features rugged stainless steel through hull bodies suitable for fiberglass, wood or metal hulls. One transducer transmits and receives to port and downwards, the other to starboard and downwards, ensuring a full 180° of underwater coverage even on boats with deep keels or other underwater protrusions. Each transducer features a 2-meter pigtail and the overall cable length when fully assembled is 10 meters (33 feet.)

  • RV-412P stainless steel port transducer array with 2-meter cable
  • RV-412S plastic starboard transducer array with 2-meter cable
  • RealVision 3D Transducer Y-Cable
  • RealVision 3D 8-meter (26-feet) Transducer Extension Cable
  • Anti-rotation bolt kit
  • Installation instructions

Part Number: T70450


RV-412 Plastic Through Hull Transducer Pack | Raymarine by FLIR

RV-420 Stainless Steel Through Hull Transducer Pack (with 20° Tilt)

Through Hull

Designed for inboard or outboard boats, the RV-420 stainless steel through hull transducer system lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar.

The RV-420 system is a 4-channel, Wide Spectrum CHIRP transducer system with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. The transducer system has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, automatically compensating for vessel motion. You’ll enjoy crystal-clear imagery in waves, swells, and while maneuvering. The RV-420 system also has a built-in fast response water temperature sensor for quick, accurate readings.

Raymarine’s RV-420 Plastic Through Hull Transducer system pack contains a pair of RealVision 3D transducers with internal tilt to accommodate hull deadrise angles from 14° to 26°. This completely eliminates the need for fairing blocks. The low-profile design slips effortlessly through the water without causing drag or cavitation. The near-flush RV-420 system works even works great on trailered boats.

The RV-420 system features rugged stainless steel through hull bodies suitable for fiberglass, wood or metal hulls. One transducer transmits and receives to port and downwards, the other to starboard and downwards, ensuring a full 180° of underwater coverage even on boats with deep keels or other underwater protrusions. Each transducer features a 2-meter pigtail and the overall cable length when fully assembled is 10 meters (33 feet.)

  • RV-420P stainless steel port transducer array with 2-meter cable
  • RV-420S plastic starboard transducer array with 2-meter cable
  • RealVision 3D Transducer Y-Cable
  • RealVision 3D 8-meter (26-feet) Transducer Extension Cable
  • Anti-rotation bolt kit
  • Installation instructions

Part Number: T70451


 

Through Hull Transducers compatible with Axiom™ & Axiom™Pro Multifunction Displays

RV-212 Bronze Through Hull Transducer Pack | Raymarine by FLIR

RV-212 Bronze Through Hull Transducer Pack (with 12° deadrise compensation)

Through Hull

Designed for inboard or outboard boats, the RV-212 Bronze Through Hull Transducer System lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar.

The RV-212 system is a 4-channel, Wide Spectrum CHIRP transducer system with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. The transducer system has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, automatically compensating for vessel motion. You’ll enjoy crystal-clear imagery in waves, swells, and while maneuvering. The RV-212 system also has a built-in fast response water temperature sensor for quick, accurate readings.

Raymarine’s RV-212 Bronze Through Hull Transducer system pack contains a pair of RealVision 3D transducers with internal offset to accommodate hull deadrise angles from 6° to 18°. This completely eliminates the need for fairing blocks. The low-profile design slips effortlessly through the water without causing drag or cavitation. The near-flush RV-212 system works great on trailered boats too.

The RV-212 system features rugged cast-bronze through hull bodies suitable for fiberglass or wooden hulls. One transducer transmits and receives to port and downwards, the other to starboard and downwards, ensuring a full 180° of underwater coverage even on boats with deep keels or other underwater protrusions. Each transducer features a 2-meter pigtail, joining y-cable and 8-meter extension cable, resulting in an overall cable length of 10 meters (33 feet.)

What’s in the Box?

  • RV-212P Bronze Port Transducer with 2-meter cable
  • RV-212S Bronze Starboard Transducer with 2-meter cable
  • RealVision 3D Transducer Y-Cable
  • RealVision 3D 8-meter (26-feet) Transducer Extension Cable
  • Anti-rotation bolt kit
  • Installation instructions

Part Number: T70318


RV-220 Bronze Through Hull Transducer Pack | Raymarine by FLIR

RV-220 Bronze Through Hull Transducer Pack (with 20° deadrise compensation)

Through Hull

Designed for inboard or outboard boats, the RV-220 Bronze Through Hull Transducer System lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar.

The RV-220 system is a 4-channel, Wide Spectrum CHIRP transducer system with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. The transducer system has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, automatically compensating for vessel motion. You’ll enjoy crystal-clear imagery in waves, swells, and while maneuvering. The RV-220 system also has a built-in fast response water temperature sensor for quick, accurate readings.

Raymarine’s RV-220 Bronze Through Hull Transducer system pack contains a pair of RealVision 3D transducers with internal offset to accommodate hull deadrise angles from 14° to 26°. This completely eliminates the need for fairing blocks. The low-profile design slips effortlessly through the water without causing drag or cavitation. The near-flush RV-220 system works great on trailered boats too.

The RV-220 system features rugged cast-bronze through hull bodies suitable for fiberglass or wooden hulls. One transducer transmits and receives to port and downwards, the other to starboard and downwards, ensuring a full 180° of underwater coverage even on boats with deep keels or other underwater protrusions. Each transducer features a 2-meter pigtail, joining y-cable and 8-meter extension cable, resulting in an overall cable length of 10 meters (33 feet.)

What’s in the Box?

  • RV-220P Bronze Port Transducer with 2-meter cable
  • RV-220S Bronze Starboard Transducer with 2-meter cable
  • RealVision 3D Transducer Y-Cable
  • RealVision 3D 8-meter (26-feet) Transducer Extension Cable
  • Anti-rotation bolt kit
  • Installation instructions

Part Number: T70319


RV-312 Plastic Through Hull Transducer Pack | Raymarine by FLIR

RV-312 Plastic Through Hull Transducer Pack (with 12° deadrise compensation)

Through Hull

Designed for inboard or outboard boats, the RV-312 Plastic Through Hull Transducer System lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar.

The RV-312 system is a 4-channel, Wide Spectrum CHIRP transducer system with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. The transducer system has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, automatically compensating for vessel motion. You’ll enjoy crystal-clear imagery in waves, swells, and while maneuvering. The RV-312 system also has a built-in fast response water temperature sensor for quick, accurate readings.

Raymarine’s RV-312 Plastic Through Hull Transducer system pack contains a pair of RealVision 3D transducers with internal offset to accommodate hull deadrise angles from 6° to 18°. This completely eliminates the need for fairing blocks. The low-profile design slips effortlessly through the water without causing drag or cavitation. The near-flush RV-312 system works great on trailered boats too.

The RV-312 system features rugged plastic through hull bodies suitable for fiberglass, steel or aluminum hulls. One transducer transmits and receives to port and downwards, the other to starboard and downwards, ensuring a full 180° of underwater coverage even on boats with deep keels or other underwater protrusions. Each transducer features a 2-meter pigtail, joining y-cable and 8-meter extension cable, resulting in an overall cable length of 10 meters (33 feet.)

What’s in the Box?

  • RV-312P Plastic Port Transducer with 2-meter cable
  • RV-312S Plastic Starboard Transducer with 2-meter cable
  • RealVision 3D Transducer Y-Cable
  • RealVision 3D 8-meter (26-feet) Transducer Extension Cable
  • Anti-rotation bolt kit
  • Installation instructions

Part Number: T70320

RV-320 Plastic Through Hull Transducer Pack | Raymarine by FLIR

RV-320 Plastic Through Hull Transducer Pack (with 20° deadrise compensation)

Through Hull

Designed for inboard or outboard boats, the RV-320 Plastic Through Hull Transducer System lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar.

The RV-320 system is a 4-channel, Wide Spectrum CHIRP transducer system with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. The transducer system has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, automatically compensating for vessel motion. You’ll enjoy crystal-clear imagery in waves, swells, and while maneuvering. The RV-320 system also has a built-in fast response water temperature sensor for quick, accurate readings.

Raymarine’s RV-320 Plastic Through Hull Transducer system pack contains a pair of RealVision 3D transducers with internal offset to accommodate hull deadrise angles from 14° to 26°. This completely eliminates the need for fairing blocks. The low-profile design slips effortlessly through the water without causing drag or cavitation. The near-flush RV-320 system works even works great on trailered boats.

The RV-320 system features rugged plastic through hull bodies suitable for fiberglass, steel or aluminum hulls. One transducer transmits and receives to port and downwards, the other to starboard and downwards, ensuring a full 180° of underwater coverage even on boats with deep keels or other underwater protrusions. Each transducer features a 2-meter pigtail, joining y-cable and 8-meter extension cable, resulting in an overall cable length of 10 meters (33 feet.)

  • RV-320P Plastic Port Transducer with 2-meter cable
  • RV-320S Plastic Starboard Transducer with 2-meter cable
  • RealVision 3D Transducer Y-Cable
  • RealVision 3D 8-meter (26-feet) Transducer Extension Cable
  • Anti-rotation bolt kit
  • Installation instructions

Part Number: T70321

RV-412 Plastic Through Hull Transducer Pack | Raymarine by FLIR

RV-412 Stainless Steel Through Hull Transducer Pack (with 12° Tilt)

Through Hull

Designed for inboard or outboard boats, the RV-412 stainless steel through hull transducer system lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar.

The RV-412 system is a 4-channel, Wide Spectrum CHIRP transducer system with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. The transducer system has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, automatically compensating for vessel motion. You’ll enjoy crystal-clear imagery in waves, swells, and while maneuvering. The RV-412 system also has a built-in fast response water temperature sensor for quick, accurate readings.

Raymarine’s RV-412 Plastic Through Hull Transducer system pack contains a pair of RealVision 3D transducers with internal tilt to accommodate hull deadrise angles from 6° to 18°. This completely eliminates the need for fairing blocks. The low-profile design slips effortlessly through the water without causing drag or cavitation. The near-flush RV-412 system works even works great on trailered boats.

The RV-412 system features rugged stainless steel through hull bodies suitable for fiberglass, wood or metal hulls. One transducer transmits and receives to port and downwards, the other to starboard and downwards, ensuring a full 180° of underwater coverage even on boats with deep keels or other underwater protrusions. Each transducer features a 2-meter pigtail and the overall cable length when fully assembled is 10 meters (33 feet.)

  • RV-412P stainless steel port transducer array with 2-meter cable
  • RV-412S plastic starboard transducer array with 2-meter cable
  • RealVision 3D Transducer Y-Cable
  • RealVision 3D 8-meter (26-feet) Transducer Extension Cable
  • Anti-rotation bolt kit
  • Installation instructions

Part Number: T70450

RV-412 Plastic Through Hull Transducer Pack | Raymarine by FLIR

RV-420 Stainless Steel Through Hull Transducer Pack (with 20° Tilt)

Through Hull

Designed for inboard or outboard boats, the RV-420 stainless steel through hull transducer system lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar.

The RV-420 system is a 4-channel, Wide Spectrum CHIRP transducer system with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. The transducer system has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, automatically compensating for vessel motion. You’ll enjoy crystal-clear imagery in waves, swells, and while maneuvering. The RV-420 system also has a built-in fast response water temperature sensor for quick, accurate readings.

Raymarine’s RV-420 Plastic Through Hull Transducer system pack contains a pair of RealVision 3D transducers with internal tilt to accommodate hull deadrise angles from 14° to 26°. This completely eliminates the need for fairing blocks. The low-profile design slips effortlessly through the water without causing drag or cavitation. The near-flush RV-420 system works even works great on trailered boats.

The RV-420 system features rugged stainless steel through hull bodies suitable for fiberglass, wood or metal hulls. One transducer transmits and receives to port and downwards, the other to starboard and downwards, ensuring a full 180° of underwater coverage even on boats with deep keels or other underwater protrusions. Each transducer features a 2-meter pigtail and the overall cable length when fully assembled is 10 meters (33 feet.)

  • RV-420P stainless steel port transducer array with 2-meter cable
  • RV-420S plastic starboard transducer array with 2-meter cable
  • RealVision 3D Transducer Y-Cable
  • RealVision 3D 8-meter (26-feet) Transducer Extension Cable
  • Anti-rotation bolt kit
  • Installation instructions

Part Number: T70451

RealVision 3D Transducer Specifications

RV-100 All-In-One Transom Mount Transducer | Raymarine by FLIR RV-200 Bronze All-In-One Through Hull Transducer | Raymarine by FLIR RV-300 Plastic All-In-One 0° Through Hull Transducer | Raymarine by FLIR RV-212 Bronze Through Hull Transducer Pack | Raymarine by FLIR RV-220 Bronze Through Hull Transducer Pack | Raymarine by FLIR RV-312 Plastic Through Hull Transducer Pack | Raymarine by FLIR RV-320 Plastic Through Hull Transducer Pack | Raymarine by FLIR
REALVISION 3D TRANSDUCER SPECIFICATIONS
Model RV-100 RV-200 RV-300 RV-212 RV-220 RV-312 RV-320
Part Number A80464 A80465 A80470 T70318 T70319 T70320 T70321
Installation Transom Mount Through Hull
Material Plastic Bronze Plastic Bronze Bronze Plastic Plastic
Power (RMS) -
Max Depth (Ft) 3D: 300 | DownVision: 600 | Port: 300 | Starboard: 300 | Conical: 900
Frequency (KHz) RealVision | High CHIRP
Beam Width (L/H) 3D: 180° | Down: 60° | Conical: 25°
Records Depth and Temperature
Approved Hull Material Fiberglass | Wood | Metal Fiberglass | Wood Fiberglass | Metal Fiberglass | Wood Fiberglass | Wood Fiberglass | Metal Fiberglass | Metal
Cable Length (Ft/M) 26 / 8 26 / 8 26 / 8 33 / 10 33 / 10 33 / 10 33 / 10
Supported Deadrise / Transom Angles 0-90° Transom 0-5° Dead rise 0-5° Dead rise 5-15° Dead rise 15-25° Dead rise 5-15° Dead rise 15-25° Dead rise

RealVision 3D Transducer Ordering Information

TRANSOM MOUNT TRANSDUCERS
Part Number Description
A80464 RV-100 RealVision 3D Transom Mount Transducer. Direct connect to Axiom MFDs (8m cable)
BRONZE THROUGH HULL TRANSDUCERS
Part Number Description
A80465 RV-200 RealVision 3D Bronze Through Hull Transducer 0°.
Direct connect to Axiom (8m cable)
T70318 Pack of RV-212 RealVision 3D Bronze Thru Hull Transducers, Port & Starboard 12°.
Direct connect to Axiom (2 x 2m, Y-cable and 8m extension cable)
A80466 RV-212P RealVision 3D Bronze Through Hull Transducer Port 12°.
Direct connect to Axiom (2m cable)
A80467 RV-212S RealVision 3D Bronze Through Hull Transducer Starboard 12°.
Direct connect to Axiom (2m cable)
T70319 Pack of RV-220 RealVision 3D Bronze Thru Hull Txds, Port & Starboard20°.
Direct connect to Axiom (2 x 2m, Y-cable and 8m extension cable)
A80468 RV-220P RealVision 3D Bronze Through Hull Transducer Port 20°.
Direct connect to Axiom (2m cable)
A80469 RV-220S RealVision 3D Bronze Through Hull Transducer Starboard 20°, Direct connect to Axiom (2m cable)
PLASTIC THROUGH HULL TRANSDUCERS
Part Number Description
A80470 RV-300 RealVision 3D Plastic Through Hull Transducer 0°.
Direct connect to Axiom (8m cable)
T70320 Pack of RV-312 RealVision 3D Plastic Thru Hull Txds, Port & Starboard 12°.
Direct connect to Axiom (2 x 2m, Y-cable and 8m extension cable)
A80471 RV-312P RealVision 3D Plastic Through Hull Transducer Port 12°.
Direct connect to Axiom (2m cable)
A80472 RV-312S RealVision 3D Plastic Through Hull Transducer Starboard 12°.
Direct connect to Axiom (2m cable)
T70321 Pack of RV-320 RealVision 3D Plastic Thru Hull Txds, Port & Starboard 20°.
Direct connect to Axiom (2 x 2m, Y-cable and 8m extension cable)
A80473 RV-320P RealVision 3D Plastic Through Hull Transducer Port 20°.
Direct connect to Axiom (2m cable)
A80474 RV-320S RealVision 3D Plastic Through Hull Transducer Starboard 20°.
Direct connect to Axiom (2m cable)

RealVision Transducer Cables and Accessories


Cables

RealVision 3D Extensoin Cable | Raymarine

RealVision 3D Transducer Extension Cables

RealVision 3D Transducer Extension Cables work with both the transom mounted RV-100, as well as through-hull RV-200 and RV-300 series transducers. Each extension cable features a waterproof, twist-lock connector at the MFD end, and a compatible socket at the transducer end. For best performance, Raymarine recommends using no more than two (2) extension cables in any given cable run. Please refer to the table below for available lengths.
Note: The total length of cable between a transducer and the MFD should not exceed 18m.

  • Part Number: A80475 - RealVision 3D Transducer Extension Cable 3-meters (10-feet)

  • Part Number: A80476 - RealVision 3D Transducer Extension Cable 5-meters (16-feet)

  • Part Number: A80477 - RealVision 3D Transducer Extension Cable 8-meters (26-feet)

RealVision 3D Adaptor Cable | Raymarine

RealVision Transducer Adaptor Cables

The AXIOM Transducer Adaptor Cables are used to link compatible Transducers to an AXIOM-DV/AXIOM-RV/AXIOM-Pro Multifunction Display 9-Pin or 25-Pin SONAR port.
An example would be to link a 600W E66054 P66 Transducer to the rear of an AXIOM-RV, you would require the adaptor cable: A80489 (8-Pin to 25-pin).
The overall length of the transducer adaptor Y-Cables are 0.3 meters (1-foot). It is fitted with waterproof connections to mate the transducers and the Axiom MFD’s sonar port.

AXIOM DV adaptor cables:

  • Part Number: A80484 - 9-pin to 7-pin adaptor

  • Part Number: A80485 - 9-pin to 8-pin adaptor

AXIOM RV

  • Part Number: A80488 - 25-pin to 7-pin adaptor

  • Part Number: A80489 - 25-pin to 8-pin adaptor

  • Part Number: A80490 - 25-pin to 9-pin adaptor

AXIOM-Pro RVX

  • Part Number: A80496 - 11-pin to 8-pin adaptor

RealVision 3D Y-Cable | Raymarine

RealVision 3D Split Transducer Y-Cable

The RealVision 3D Split Transducer Y-Cable is used in through hull transducers installations using dual deadrise compensated transducers. The Y-Cable is used to join together the Port and Starboard transducer arrays, and a suitable length RealVision 3D Transducer Extension Cable is used to make the run to the Axiom multifunction displays. The overall length of the transducer Y-Cable is 0.3 meters (1-foot). It is fitted with waterproof connections to mate to the transducer arrays and the Axiom MFD’s sonar port.

  • Part Number: A80478

RealVision 3D Y-Cable Adaptor | Raymarine

RealVision Transducer Adaptor Y-Cables

The AXIOM Transducer Adaptor Y-Cables are used to link multiple transducers to an AXIOM-DV/AXIOM-RV/AXIOM-Pro Multifunction Display.
An example would be to link an RV-100 A80464 RealVision Transducer and a 600W E66054 P66 Transducer to the rear of an AXIOM-RV, you would require the adaptor Y-Cable: A80492.
The overall length of the transducer adaptor Y-Cables are 0.3 meters (1-foot). It is fitted with waterproof connections to mate the transducers and the Axiom MFD’s sonar port.

AXIOM DV adaptor Y-Cables:

  • Part Number: A80486 - 9-pin to 7 & 9-pin adaptor

  • Part Number: A80487 - 9-pin to 8 & 9-pin adaptor

AXIOM RV adaptor Y-Cables:

  • Part Number: A80491 - 25-pin to 25 & 7-pin adaptor

  • Part Number: A80492 - 25-pin to 25 & 8-pin adaptor

  • Part Number: A80493 - 25-pin to 9 & 7-pin adaptor

  • Part Number: A80494 - 25-pin to 9 & 8-pin adaptor

RealVision 3D Right Angled Cable | Raymarine

RealVision 3D Right Angled Adaptor Cable

The RealVision 3D Right Angled adaptor Cable can be connected directly to the rear of the AXIOM 25-pin SONAR port. It reduces the plug hight, should this be an issue during installation. The overall length of the right Angled Cable is 0.5 meters (~1.6 foot). It is fitted with waterproof connections to mate to the transducer and the AXIOM MFD’s sonar port.

  • Part Number: A80515


Accessories

RV-100 RealVision 3D Transom Bracket Kit | Raymarine

RV-100 RealVision 3D Transom Bracket Kit

This transom mount transducer service kit includes all of the spare parts and accessories originally included with the RV-100 transducer. The bracket kit includes the stainless steel transom bracket and mounting screws, kick-up pivot hardware, transducer carrier bracket and the carrier mounting bolt. The RV-100 transducer and cable is not included.

  • Part Number: R70521

RV-100 Jack Plate Mount | Raymarine

RV-100 Jack Plate Mount

The RV-100 Jack Plate Mounting Kit is the perfect accessory for mounting the RealVision 3D RV-100 transducer onto bass boats, flats boats and other shallow-draft, high-speed, outboard motor-powered boats. The bracket is made from marine grade stainless-steel and is pre-drilled to ensure a suitable fit on a wide variety of jack plate models. Bolts, washers, Nylock nuts and detailed instructions are included to complete the installation.

  • Part Number: A80480

Jack Plate Spacer Kit | Raymarine

Jack Plate Spacer Kit

The Jack Plate Spacer Kit is used for installations where more horizontal clearance is required between the RV-100 transducer and the outboard motor. The kit includes 4 2-inch aluminum spacers, 4 extended length bolts, 8 washers and 8 Nylock nuts.

  • Part Number: A80482